-
- Application
- Electronics Industry
Application
Electronics Industry
Our cutting machines which are used in electronics industry include piece cutting machine with unwinder, roller feeding machine, high speed feeding machine, etc.
TK360-2 Piece Cutting Machine with Unwinder
- Cold cut
- Max width: 360 mm
- Max length: 9999.9 mm
- It has 3" air shaft to put a roll of material.
- Knife motor is servo.
- Material: Paper, Canvas, Denim, Bubber, Neoprene, Graphite, Composites, Vinyl, Leather, Plastic, FiberglassC, Ardboard, Non-woven fabricN, on-woven cloth, other Synthetic materials
AFV-F05 Roller Feeding Machine
- Served as material collector and feeder.
TK550-2 Piece Cutter with Unwinder
- Cold cut
- Max width: 550 mm
- Max length: 9999.9 mm
- The machine employs PLC and touch panel for operation.
- It has 3" air shaft to put a roll of material.
- Knife motor is servo.
- Material: Paper, Canvas, Denim, Bubber, Neoprene, Graphite, Composites, Vinyl, Leather, Plastic, FiberglassC, Ardboard, Non-woven fabricN, on-woven cloth, other Synthetic materials
NTK-100F Flexible Flat Cable Cutter
- Cold cut
- Max width: 100 mm
- Max length: 9999.9 mm
- This machine employs micro-computer digital controller and sensor for accurate positioning.
- The machine can cut different tones of flat cable, bare copper and gold plated special flat cable (either reinforced or not) twice at the same point.
- The cutting speed is fast, and the cutting loss is less.
Operation is simple and easy. - Material: FFC, FPC, Pole sheet of lithium battery, Pole sheet of capacitor
TK-650 2 Machine in 1
- Cold cut
- Max width: 650 mm
- Max length: 9999.9 mm
- The machine employs PLC and touch panel for operation.
- It has 3" air shaft to put a roll of material.
- Knife motor and feeding motor use servo.
- Material: Paper, Canvas, Denim, Bubber, Neoprene, Graphite, Composites, Vinyl, Leather, Plastic, Fiberglass, Cardboard, even metals such as copper and aluminum
NTK-160D1 Micro Computer Cutting Machine
- Cold cut
- Max width: 160 mm
- Max length: 9999.9 mm
- The machine has complete cut off and kiss cut functions: (1) cutoff (2) kiss cut (3) several kiss cut plus one cutoff.
- Material: Tape, Bubble sponge, Double-sided tape, Non-woven fabric, Non-woven cloth
AFV-150H High Speed Feeding Machine
- Max width: 150 mm
- It can be incorporated with the belt cutting machine for cutting heavier or flexible material, and enhance cutting efficiency.
TK-1250 2 Machine in 1
- Cold cut
- Max width: 1250mm
- Max length: 9999.9mm
- The machine employs PLC and touch panel for operation.
- It has 3" air shaft to put a roll of material.
- Knife motor and feeding motor use servo.
- Material: Paper、Canvas、Denim、Bubber、Neoprene、Graphite、Composites、Vinyl、Leather、Plastic、Fiberglass、Cardboard、even metals such as copper and aluminum.
AFV-360 Vertical Auto Feeder
- Max width: 360 mm
- It can be incorporated with the belt cutting machine for cutting heavier or flexible material, and enhance cutting efficiency.
TK-650RM Micro-Computer X-Y axis Piece Cutter with Roller
- Cutoff and kiss cut
- Max width: 650mm
- It can cut roll materials or sheet materials.
- The machine employs PLC and touch panel for operation.
- The flywheel cutting knife is installed with solenoid clutch that is good for kiss-cut.
- It can install die to punch shape. (The cutting shapes are limited.Please contact us beforehand.)
- There are 6 kinds of different length cutting for cutting cycle.
- Suitable a roll material or sheet material.
- Material: Mangetism or heat condusting material, such as silicon sheet, double-sided tape, bubble sponge, electric conducting cloth, heat radiation seet, etc..
AFV-360L1 Laminating Machine
- Max width: 360mm
- This machine works on 2-layer lamination.
TK-1250YMT Clamping Type X-Y axis Auto Rotating Cutter (Supper Cutter)
- Cut off and kiss cut
- Max width: 1250 mm
- It just can cut sheet materials.
- The machine employs PLC and touch screen control panel for operation.
- It being installed with (grinding grade) ball screws can feed material accurately.
- It can install die to punch shape. (The cutting shapes are limited. Please contact us beforehand.)
- There are 6 kinds of different length cutting for cutting cycle.
- Suitable a roll material or sheet material.
- Material: Mangetism or heat condusting material, such as silicon sheet, double-sided tape, bubble sponge, electric conducting cloth, heat radiation sheet, etc.